Superstar Switch hub bearing change manual

Overview Chat Bike Members News Women

This topic has 5 replies, 4 voices, and was last updated 12 years ago by al.

Viewing 6 posts - 1 through 6 (of 6 total)

Superstar Switch hub bearing change manual
mrjmt
Free Member

I know i’ve seen a link posted somewhere to the manual for changing bearings / freehub on a switch rear hub, but can’t find it after at least 2 attempts at searching. I think it was on the novatech site but cant find it on there either.

Anyone know it? 😕

Posted 12 years ago

kona100
Free Member

I can email them to you if you want….

Posted 12 years ago

mrjmt
Free Member

That’d be grand. Email now in profile.

Cheers. 😀

Posted 12 years ago

nealy
Free Member

I think they are Novatec B881SB / D882SB hubs. I haven’t got them myself but may be soon so can’t confirm the links below are the right ones but have a look.

http://www.novatec.com.tw/novatec/english/p_show.php?sid=280

http://issuu.com/novatecwheels/docs

Also it looks like one of the bearing is behind the freehub engagement ring so you’ll also need a freehub ring nut removal tool, if it’s the same as the DT ones then it’ll be £50!!

http://www.fawkes-cycles.co.uk/3496/products/DT-Swiss-Ring-Nut-Inst-240s-FR.aspx?utm_source=Froogle&utm_medium=PriceComp&utm_term=Froogle&utm_content=None&utm_campaign=PriceComp1

Posted 12 years ago

nealy
Free Member

It looks like the Novatec freehub ratchet ring tools are 24 tooth and the DT Swiss ones are 26 tooth so you’ll need to make your own, take it to a LBS or sent it back to Superstar!

Posted 12 years ago

al
Full Member

The drive side bearing isn’t “behind” the ratchet ring, it slides right through it. No need to remove the ratchet ring at all.

Posted 12 years ago