Forum menu
2013 Revelation RCT...
 

[Closed] 2013 Revelation RCT3s @130mm - How do I do it?

Posts: 0
Free Member
Topic starter
 
[#4556264]

I was expecting to be able to buy a pair of these from anywhere with them in stock, strip them down and space them to 130mm. From a cursory search on this fine website, I'm not so sure I'm going to be able to.

Can someone give me the definitive answer?

a) I can buy them and do it myself; or
b) I need to buy them ready adjusted as special parts are needed.

Bloody marzocchi discontinuing the forks I wanted!

Dave


 
Posted : 14/11/2012 12:12 pm
Posts: 13862
Free Member
 

Can't say for sure on the 2013s, but it's dead straightforward on 2012 and before

http://www.bikeradar.com/gear/article/workshop-how-to-adjust-travel-on-a-rockshox-trail-fork--26840/


 
Posted : 14/11/2012 12:16 pm
Posts: 251
Full Member
 

give Loco or TFTuned a call?


 
Posted : 14/11/2012 12:16 pm
Posts: 0
Free Member
Topic starter
 

It is a bit annoying that SRAM don't give any details on their website.

They list the fork as being for 130/140/150mm travel, and since it has always been doable with spacers before, if that has changed, I'd expect them to publicise it a bit - to just let people buy them blind is not really cricket.

Dave


 
Posted : 14/11/2012 12:38 pm
 mda
Posts: 86
Full Member
Posts: 0
Full Member
 

see http://singletrackworld.com/forum/topic/rockshox-2013-solo-air-travel-reduction-critical-problem

as far as I know the spring assemblies aren't available in the UK yet. I think Nov/Dec was the latest word


 
Posted : 14/11/2012 1:58 pm
Posts: 0
Free Member
Topic starter
 

cheers all.. loco lists them at 150mm and 140mm, I presume the latter will have been sorted with the alternate air spring.

trouble is, the price is about £100 more than they are on winstanleys - seems like quite a premium to have them at the desired height 🙁

Hmm.... what fork do I want 😕

Dave


 
Posted : 14/11/2012 2:03 pm
 dlr
Posts: 701
Free Member
 

Bugger, I presume this is the same for the Revelation 29er solo airs then? I was going to get a set and lower them down for now but not if it needs a new solo air assembly as well


 
Posted : 14/11/2012 3:27 pm
Posts: 0
Free Member
 

It is true. You can't lower them using spacers like previous revs. I was about to get some to run at 130mm on my soul but bought some 120mm sids rct3's instead and they are lovely forks.


 
Posted : 14/11/2012 8:51 pm
Posts: 798
Full Member
 

You can't lower 2013 revs (or sids etc) in the same way you could previous years, you'd need a new spring assembly that costs £££.

Is you haven't bought it yet go for a 2012. You can still pick them up on t'internet.


 
Posted : 14/11/2012 10:35 pm