X fusion forks.. Who knows?

Home Forum Bike Forum X fusion forks.. Who knows?

Viewing 11 posts - 1 through 11 (of 11 total)
  • X fusion forks.. Who knows?
  • SOAP
    Member

    Can I drill a hole in the rod to make them 130mm travel? Rather than 120 or 140mm

    Premier Icon sprocker
    Subscriber

    Yep I did

    matthew_h
    Member

    Or just set them at 140mm but add a 10mm all-travel spacer to sort it without having to drill anything

    SOAP
    Member

    I need to get my A2C down.. And 130mm is the limit.

    matthew_h
    Member

    The spacer does exactly the same as drilling it, just doesn’t need drilling. You’ll still end up with shorter A to C

    SOAP
    Member

    Got a link matthew_h ?

    Premier Icon Speshpaul
    Subscriber

    If you need a spacer try Jim at JTECH or upgrade

    matthew_h
    Member

    Nope but we’ve done it in the shop loads. Leave the disc with the split pin where it would be for 140mm then add a 10mm spacer between it and the rest of the spring assembly. Has exactly the same effect as drilling and moving the disc down but means no drilling, keeping the fork intact and is entirely reversable.

    SOAP
    Member

    Ahh ok I got it now.. Bit like a fox volume reducer?
    Ill give him a call tomorrow.

    matthew_h
    Member

    It’s not the best photo but this kinda shows what I mean:

    Premier Icon Alex
    Subscriber

    J-Tech did mine when I bought a new pair of Trace’s.

Viewing 11 posts - 1 through 11 (of 11 total)

The topic ‘X fusion forks.. Who knows?’ is closed to new replies.