WTD – XT of SLX front Mech M785, 2*10

Home Forum Classifieds – Wanted WTD – XT of SLX front Mech M785, 2*10

Viewing 9 posts - 1 through 9 (of 9 total)
  • WTD – XT of SLX front Mech M785, 2*10
  • DrP
    Member

    I’ve an XT M770 – it’s a top swing dual pull (can route cable from top/bottom)…
    Will double check but certain it’s 31.8/34.9mm sized…

    Excellent nick, and have the relevent shifter (XT) too if needed?

    £12 for the mech, £14 for the shifter, cheaper if both….

    DrP

    (and looking here it seems it will fit…)

    tinybits
    Member

    Isn’t the M770 9 speed?

    And that’s spooky, linking to a thread I may have started with an old login that I can’t remember the password for!!

    godzilla
    Member

    I have a 2×10 front mech m785 in super condition for £12.50

    tinybits
    Member

    OK all you going 1*10, what front mech have you got? Must be top pull and would want shims to suit Giant Anthem 2009

    Thanks

    tinybits
    Member

    sounds like a winner

    could you mail me on tinybits76@gmail.com

    DrP
    Member

    9 speed/10 speed..all the same on a front mech!

    DrP

    tinybits
    Member

    wait, what? really? Then the one I’m using now on a 9speed triple will work on a 10 speed double? That I didn’t know…

    DrP
    Member

    Yeah!
    I was running the set up above (XT m770 front mech and shifter) for 2×10, before going 1x……!
    The chainrings are essentially the same too… (for example, single chainrings are either sold as ‘single speed’, or ‘9/10 speed’…)
    DrP

    tinybits
    Member

    Godzilla, still interested, I’ve been looking at my (LX!) front mech and it could do with an upgrade….

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘WTD – XT of SLX front Mech M785, 2*10’ is closed to new replies.