Wide (685mm+) bar Home › Forum › Classifieds – Wanted › Wide (685mm+) bar Viewing 9 posts - 1 through 9 (of 9 total) Wide (685mm+) bar snakebiteMember think I have some.. 2 mins Posted 6 years ago chakapingSubscriber what length stem do you like? might be able to help Posted 6 years ago boxelderSubscriber 80-100mm (not fussy really, but I have std clamp stems galore!) Posted 6 years ago boxelderSubscriber Under £30 Low rise or flat. Std 25.4mm clamp (unless you have cheap OS stem too) Posted 6 years ago chakapingSubscriber I have this OS FSA bar (but 5mm under at 680mm)… And this 90mm Easton EA50 OS stem (pictured to show scuff)… Which you could have for £25. Or this 90mm Syntace Superforce stem and 700mm Vector lowrider bar combo… Which is 25.4mm but has a special wide clamp which makes it feel as stiff as OS anyway, clever Krauts! £37 posted for those. Top-end Germanic engineering! 🙂 Posted 6 years ago davewalshMember I’ve got an Easton EA70 Monkeybar, 685mm wide, low rise, 25.4 clamp. Good condition, perfectly straight, minor scuffs from stem & controls that are invisible when fitted. Looking for £20 posted. e-mail d4vew4lsh at gmail dot com if interested. Posted 6 years ago boxelderSubscriber davewalsh – mail sent chapaking – how much for the Syntace bars alone? Or would you swap them for £20 and a Deus stem (older, nicer one) in 90mm, like this (the pic isn’t mine!): Posted 6 years ago fudge9202Member Have mailed you re funn bars they are 710mm x 25.4mm x 30mm rise Posted 6 years ago chakapingSubscriber Sorry can’t split syntace stuff as they are both designed for the special wide clamp and I don’t think they’re supposed to be used with normal 25.4mm bits. Posted 6 years ago Viewing 9 posts - 1 through 9 (of 9 total) The topic ‘Wide (685mm+) bar’ is closed to new replies.