Tracer 2, mavic deemax , chromag bars, cheap high rollers and more

Home Forum Classifieds – For Sale Tracer 2, mavic deemax , chromag bars, cheap high rollers and more

Viewing 4 posts - 1 through 4 (of 4 total)
  • Tracer 2, mavic deemax , chromag bars, cheap high rollers and more
  • All items are available for collection/viewing in peebles or can be posted at additional cost. Spent most of the day cleaning the parts for sale so will take pictures tomorrow for those interested. Mail me on glenndotmunachenatgooglemaildotcom or leave a message on here and I’ll get back to you ASAP. I think the prices are keen but always open to offers.

    1) Intense Tracer 2 frame in medium. Fitted with a pushed CCDB coil with 450lb spring. Brilliant bike that is confidence inspiring pointing down the hill but still happy to be ridden up. There is some paint loss on the drive side chain stay and on the swing arm around the lower linkage where mud and stuff gets caught on a dirty ride. Frame has been completely stripped and cleaned for sale, bearings checked and smooth. Comes with a KS i950 125mm dropper post that was freshly serviced by the original UK distributor so in great condition. £775

    2) 2011 Mavic Deemax wheels (silver) 20mm bolt through front and rear has been converted to 142 x 12mm for use on the tracer. A good a pair of second hand wheels as you will find. Since they were fitted to a trail bike they’ve not seen any hard DH action, straight, true, smooth, no dings, flats or rock strikes. Been running these UST without any issues. – £275.

    4) Cane Creek angleset ZS49 1.5deg change for 1 1/8th steerer. complete with SFN. £75

    5) Chromag OSX fubars in black ao, 5deg up sweep, 8deg backsweep, cut to 725mm but unmarked otherwise – £30

    7) no name plastic caged pedals from Kona Honky Inc (new and unused) – £5

    NC-17 seatpost, 27.2 x 340 (to seat rails), black but almost silver from raising and lowering – £5

    10) E13 chain device stuff – enough stuff to make 2 fully working sets with all mounting options. rollers are used but smooth with plenty of life left. 4 backing plates in total and 3 x 36T supercharger bash guards for 36T 104BCD. Guards are black, white and clear. – £50 the lot.

    11) Race face atlas 104BCD 36T metal bash guard, plenty of scratches around the circumference but straight and true. – £5

    13) Race face XY layback seatposts – 3 posts but only 1 seat clamping mechanism. All 30.9mm and heavily marked from raising and lowering. 1 silver and 1 black at 330mm and 1 silver at 390mm (to seat rails) – £15 for the lot

    15) Cane creek 400 x 2.75 steel spring, good condition – £10

    18) Saint M806 34.9mm 9sp front mech for 57.5mm chainline, new an unused – £15

    19) 2 x sets of cateye stadium 2’s. Both hold a charge for around 2hrs. Old but still bright – £60 for the 2 sets.

    20) 4 x X9 medium cage 9sp rear mechs. will clean up and make at least 2 usable mechs – £10

    21) 4 Maxxis high rollers 2.35’s. very little use, i’d say 75 – 90% tread left. 2 are 60A dual ply DH casing and 2 are 60A single ply – £45 for the lot.

    Cheers for now.

    scoobaru
    Member

    Do you still have the Cane Creek angleset ? Does it include everything indicated in the manual i.e. preload bolt, top cap, star nut, top cover, compression ring, bearings, gimbals, top cup, bottom cup, crown race ?

    borwens
    Member

    hi,

    do you still have the tracer?? i could be interested, could you send me some pics please? dalezUNDERSCOREmatAThotmailDOTcom cheers

    GTItalia
    Member

    hi there do you still have the Frame and can you send a few pics over? ggribau@hotmail.com

    Thanks GG

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Tracer 2, mavic deemax , chromag bars, cheap high rollers and more’ is closed to new replies.