Time pedal bearings

Home Forum Bike Forum Time pedal bearings

Viewing 4 posts - 1 through 4 (of 4 total)
  • Time pedal bearings
  • Ambrose
    Member

    There is too much play in my Time ATAK XS Carbon pedals. Has anyone any idea if these are serviceable and where the appropriate parts can be had?

    z1ppy
    Member

    assuming there the same as most other Time pedals, undo the end cap, unbolt the nut on the end of the axle (as you left them on the bike – it makes it easier) pull the pedal body off the axle.
    Voila access to the bearing, pop down you local bearing supplier and get some more
    (these were the cheapest bearings I’ve had to buy, but don’t remember what size they were off-hand)

    I had a similar problem on my left hand Time alium pedal I took the end cap off to have a look at bearing, couldnt get bearing out so just put cap back on and tightened it up and problem solved. Turned out the cap had come loose and it acts as some sort of bearing preload (not certain if thats right word) Might not be your problem but its worth a look.

    Ambrose
    Member

    Ta boys- I’ll try both of those things.

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Time pedal bearings’ is closed to new replies.