Viewing 4 posts - 1 through 4 (of 4 total)
  • Suspension mounting hardwear and bearings for 2015 Transition Scout
  • keppoch
    Full Member

    Replaced the shock bushings on my Scout at the weekend an noticed that the pins that go through are a bit worn so thought I should get some spares. They are 21.8mm long and 12.7mm diameter, looks like it should be one of these but none are the right dimension:

    Rock Shox Mounting Hardware

    Also any suggestions where to source a full set of good quality bearings?

    SirHC
    Full Member

    I used a mix of CRC and enduro bearings for my smuggler.

    The mount they use is a rockshox one:
    https://www.amazon.co.uk/Rear-Shock-Mounting-Hardware-X1/dp/B001CK2J56?th=1&psc=1

    keppoch
    Full Member

    Thanks, so do you think I need a 21.8 x6 or x8 version? Guess that refers to the inner bore which I didn’t check 🙄

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    fathomer
    Full Member

    Not sure about good quality but any Transition dealer should be able to get you a full set of bearings for £30. I used Plush Hill in Church Stretton/Telford. I also had a set from mbbearings.co.uk which ‘looked’ exactly the same as the Transition ones.

    As for bushes etc. I ended up getting some of the J-Tech HD Mounts and and some spare bushes.

Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘Suspension mounting hardwear and bearings for 2015 Transition Scout’ is closed to new replies.