Viewing 9 posts - 1 through 9 (of 9 total)
  • Sram shimano mech compatability
  • falkirk-mark
    Full Member

    Hi Sram mech exploded climbing Dumyat today on Ebike is it still the case if I go to shimano on rear mech I have to change the shifter also. Bike is 12 speed if that makes any difference.
    Cheers Mark

    Neb
    Full Member

    I’m using a SRAM 11s shifter with a Shimano 12s rear mech, it works fine. The clutch is better too!

    falkirk-mark
    Full Member

    Maybe just get the mech then

    Onzadog
    Free Member

    I believe that with 12 speed stuff, it’s all close enough that it’s viewed by many as interchangable, but not optimised.

    wzzzz
    Free Member

    I junked my Sram GX rear mech last week.

    Everything else is GX, shifter, Chain, cassette.

    Fitted a new Deore 12 Speed, works flawlessly, better shifting than I ever remember with the GX.

    It’s lower profile than GX so should be out of the way of rocks, and hopefully less fussy about having a perfectly straight hanger.

    Also at £38 is a helluva lot cheaper than GX.

    wzzzz
    Free Member

    Outer cable needs to be a few cm longer, but mine was too long anyway.

    P-Jay
    Free Member

    Currently running a GX Shifter with an XT mech, SLX cassette and a GX chain, works beautifully.

    Slowly evolving from SRAM to Shimano.

    mudeverywhere
    Free Member

    Replaced a 12spd GX mech with XT. As above it works just fine, shifts more consistently actually.

    falkirk-mark
    Full Member

    Perfect a shimano one it is then

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘Sram shimano mech compatability’ is closed to new replies.