Viewing 6 posts - 1 through 6 (of 6 total)
  • reducer for integrated headset
  • Premier Icon cromolyolly
    Free Member

    Wondering if it exist to allow the use of a straight 1 1/8 steerer fork in a tapered 1 1/8 to 1 1/2 headtube with integrated headsets. Im sure someone used to make one but I can’t find it now. Is that because to many people died using it?

    Premier Icon colp
    Full Member

    Yeah, DH bikes use them

    Chris King did the dropset 2 I think

    Premier Icon colp
    Full Member

    Scrap the Dropset answer above, try Cane Creek, I’m sure they do something

    Premier Icon LAT
    Full Member

    you can get crown races that allow you to fit a 1 1/8 fork in a 1 1/2 head set.

    Premier Icon nuke
    Full Member

    Hope HS136S…just stick on fork then stick 1.5″ crown race on the reducer. If i recall on my hemlock, it was a tight fit on the fork so i cut a slit in the reducer to make it a split reducer

    Premier Icon cromolyolly
    Free Member

    Well, duh. Having a bit of a brainfart. I was thinking I was looking for a bearing to fill the gap. I just need a crown for the fork with a smaller inner hole. Thanks all

Viewing 6 posts - 1 through 6 (of 6 total)

You must be logged in to reply to this topic.