OneUp 40T sprocket with short cage mech?

Home Forum Bike Forum OneUp 40T sprocket with short cage mech?

Viewing 7 posts - 1 through 7 (of 7 total)
  • OneUp 40T sprocket with short cage mech?
  • If you want to swap your short cage type 2 X9 mech for a long cage one then I’d be happy with that. I’m moving off 3×10 to 1×10 and was going to buy a short cage anyway.

    Mackem
    Member

    For the Zee, you have to use the FR version. So, a wild guess says that it’s not as short as “short”.

    Medium long for their 42t, the 40t was to accommodate the shorter mechs.

    chico66
    Member

    I’ve found that there’s a stop on the cage of a medium X9 type 2 that won’t let it go ‘straight’ in line with the chain when on the 42t cog. I had to allow extra chain to cope with it which means the mech is pretty folded up on the 11t and not appling a lot of tension

    Thinking of using one of these with a short cage x9 type 2 mech. Does anyone know if it will fit?

    The website says most medium & long cage will fit, but also says saint & zee will fit the 40T, which would both be short cage mechs, so I’m confused…

    Well, went for a 40T, and will try it when it arrives. I think if it doesn’t fit I will sell the sprocket rather than get a longer mech – haven’t run a long or medium cage for years.

    el_diablo
    Member

    So what was the verdict?

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘OneUp 40T sprocket with short cage mech?’ is closed to new replies.