Overview Chat Bike Members News Women
Viewing 4 posts - 1 through 4 (of 4 total)
  • "Old" Mavic Crossmax ST. Converting to 12×142 and 15mm front?
  • PolisherMan
    Full Member

    Possibly 2009-10.

    They’re 9mm QR at the moment. Information is very hard to find, but hoping to put these in a 12×142 frame with 15mm forks. I know more recent models will convert.
    Anyone point me in the right direction for info/conversion kits?

    Ta.

    Posted 10 years ago
    peteimpreza
    Full Member

    http://singletrackworld.com/forum/topic/converting-mavic-crossmax-sx-hubs-from-20mm-to-15mm-probably-pre-2012-but-not

    Posted 10 years ago
    PolisherMan
    Full Member

    It’s not as easy as Hope is it!

    Posted 10 years ago
    honourablegeorge
    Full Member

    The current 15mm adapters just push in – I reckon they’d work on the older hubs, the QR ones for my old deetraks look the same as the QRs for my Crossmax 2012

    I doubt you can adapt the rear, though – the 12mm axle goes straight in, so there’s nowhere for a 142 adapter to sit. You could probably fill the gap with 3mm of washers/tubing either side that have a 12mm ID though

    Posted 10 years ago
Viewing 4 posts - 1 through 4 (of 4 total)

The topic ‘"Old" Mavic Crossmax ST. Converting to 12×142 and 15mm front?’ is closed to new replies.

Overview Chat Bike Members News Women