trout, i feel bad now as i mentioned my lbs twelve50 bikes had them in stock and should have said they were doing a free Nukeproof headset with every frame! sorry!
Mccett
Thanks no worries I did mail them and they have still got a couple in stock if any one else is interested.
I got mine from JEJames as it was nearer to collect and I am pretty impatient when I want to buy something .
Mr Blobby I am loving it coming from FS to HT and back to FS the comfort is awesome and the hype that it rides up hill is imho true too
Deveron53 – Member
ooo, it’s the colour of my nan’s piss! You won’t attract the klunge on that!
Heh, I was gonna get a yellow one, glad I got a black. Photos of my completed build will be up tomorrow.
Welcome to the Mega club!
Rock Shox hair shocks tend to have too much low speed compression damping anyway so it’s not surprising there’s little bobbing. Stick a coil shock in it, back off any LSC / pro pedal, go up the same hill in the small ring while pedaling out of the saddle and film what happens 😉
Exactly to both points. Now find me a bike sold in 2011 that bobs badly while pedalling sat down in the middle ring (with an air shock or LSC turned up). Even my old 10″ travel Session 10 was pretty solid on the climbs as long as you didn’t get out of the saddle and rock your weight around.
Sounds brilliant. I’ll be building it up this weekend then taking it to Morzine for a week the weekend after, so should be able to give it a proper hammering 🙂
Didn’t you have an mmmbop before the mega? Great for short blasts but not a bike for a bad back!
Nothing surprising about the build, other than the amount of spacers above the stem, steerer will be cut down once I figure out where I want the bars. My k950 dropper post will also be going on as soon as I’ve given it a proper service.
Took it for a quick spin round the block and it feels about right. Seemed to pedal fine up a short but steep footpath (in 36/36). I’ve been a bit worried about this coming from shorter travel multi pivot bikes. Shall take it for a proper local ride tonight and hopefully not be spotted being seriously over biked for the terrain!
Anyone running their mega with a 10 speed SRAM X9 rear mech and a 36/12 cassette?
I’ve no clearance between the rear mech and the cassette with the chain off and the mech shifted into the larger sprockets. Pretty sure if the chain fell off then the mech would bury itself into the cassette. Wondering if this is an issue with the placement of the mech on the frame, or something to do with the way I’ve installed the mech, or something to do with X9 rear mechs.