does anyone know if I can still get wheel bearings for a pair of fairly old Mavic Crossrides dating from around 2008 or 09. There is no other writing on the hubs or rims, just Mavic Crossride. There appears to be a few different sorts available for SLR or Crossmax but I’m not sure if these will fit.

I have just looked on a 2007 tech document that suggests 2007 cross rides have Mavic part M40318 for front wheel which equates to 6001 bearings- 12 x 28 x 8mm and Mavic M40660 which are 1 x 6001 as above and 1 x 608 bearing 8 x 22 x 7mm

Edit, I have just checked the 2008 and 2009 tech docs as well and they are all as above for a disc crossride

jimw- do you have access to the Mavic techdocs? If so, please could I ask a favour and get the bearing numbers for a rear 2015 Crossroc (including the freehub)? Thanks.

no, I don’t have direct access to the documents via mavic’s site, only the ones available on line. I can’t find one for 2015, but the 2014 cross roc’s front bearing set is mavic part no. 996 885 01 and rear is 351 247 01

a bit of googling gives 996 885 01 as 32 x 20 x 7mm, I can’t find the other code

Edit: here is the link to the 2014 manual
http://www.tech-mavic.com/tech-mavic/technical_manual/data/docs/themes/2_21.pdf

Thanks for trying, not sure if they’re the same as 2014 or not. It’s a pain- all their techdocs used to be freely available but they’re now hidden behind a dealer login.

if you look on page 3 on the above doc, you will find the dealer login code 🙂

Found it!

http://www.tech-mavic.com/tech-mavic/technical_manual/data/docs/themes/2_24.pdf

Crossrocs from page 43

looks like from M40179, rear M40076 which are 61805 and 6903 respectively

Amazing, thanks!

thanks for the info jimw, most helpful 🙂