Viewing 14 posts - 1 through 14 (of 14 total)
  • Key not releasing from deadlock in the unlocked position
  • eddiebaby
    Free Member

    Hi folks, the front door has developed sudden problem. Unlock the door open it but can’t remove the key with out relocking the now open door. Then put the key in the other side unlock the door, close and then relock it.
    A pain.
    It happened before and the landlord had some effortless fix, but he’s on his holidays for another fortnight. Any of you guys got any ideas on how to reset it? It seems to happen every couple of years.

    perchypanther
    Free Member

    What kind of lock is it?

    *predicts Euro profile cylinder change in the near future

    johnners
    Free Member

    What kind of lock is it?

    The kind you should be squirting some GT85 into.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    eddiebaby
    Free Member

    I thought locks need graphite rather than GT85.

    eddiebaby
    Free Member

    What kind of lock is it?

    I don’t know. What should I look for?

    perchypanther
    Free Member

    Does the bit where the key goes look like this?

    eddiebaby
    Free Member

    I’ll let you know when I get back to the house.

    johnners
    Free Member

    I thought locks need graphite rather than GT85.

    Not if you rebrand it as a specialist product like these chancers!

    Just do it, it’ll be reet.

    perchypanther
    Free Member

    Try the GT85 first. Most likely just a sticky tumbler.

    Not just on the lock but also on the  door closing mechanism if it’s a UPVC door.

    If it is a Euro Cylinder, you can change them in about a minute, usually a single screw on the edge of the door holds them in place  and new barrels are less than £20.

    Take the old one out and take it to an ironmonger so that they can match the size.

    eddiebaby
    Free Member

    Fixed it. It was like the lock barrel had got out of phase with something, so I put a key in both side of the door and twiddled things and now its all OK.

    tillydog
    Free Member

    Fixed it. It was like the lock barrel had got out of phase with something, so I put a key in both side of the door and twiddled things and now its all OK.

    I was just about to tell you to put a key in each side and turn one of them against the other.

    Unfortunately, if it’s happened once it’ll happen again (do you leave your keys in the back of the door?), so best get the lock cylinder changed. If you end up doing it yourself you’ll need to measure the existing cylinder – (Clicky) It is a “euro” cylinder lock, btw.

    Cougar
    Full Member

    If you do, do not buy another Euro-cylinder lock. They’re beyond shit, you can break into them in seconds. This is what you need (and was the cheapest price I could find by a long way when I bought one a few months ago):

    https://www.barnsleylock.co.uk/avocet-abs-mk3-ultimate–double-cylinders-3150-343-c.asp

    perchypanther
    Free Member

    Those are still Euro profile cylinders. They’re just more robust ones.

    eddiebaby
    Free Member

    I shall pass all your wisdom on to my landlord. As the house will up for sale in a few months I suspect I know his response…
    Thanks for the input folks.

Viewing 14 posts - 1 through 14 (of 14 total)

The topic ‘Key not releasing from deadlock in the unlocked position’ is closed to new replies.