Intense Slopestyle, Fox 36 RC2, XTR, Pro 2 evo etc £1650, bargain!

Home Forum Classifieds – For Sale Intense Slopestyle, Fox 36 RC2, XTR, Pro 2 evo etc £1650, bargain!

Viewing 13 posts - 1 through 13 (of 13 total)
  • Intense Slopestyle, Fox 36 RC2, XTR, Pro 2 evo etc £1650, bargain!
  • 0pt1cal
    Member

    Nice build, I miss my SS but not looking for a full bike at the minute. If you go for a split i’ll take the forks.

    jeron
    Member

    Cheers, its an awesome bike. I’ll keep that in mind, but going for the full bike!

    Oh and my email is jeron@hotmail.co.uk so get in touch!

    Premier Icon mrh86
    Subscriber

    Would you be interested in a bit of a bulk sale of parts….
    wheels, brakes, rotors, drivetrain (inc. cassette, shifters, mechs +chainguide)

    Email : martyn(at)mrh86(dot)co(dot)uk

    jeron
    Member

    Only if the frame and forks went first.

    If it doesn’t sell as a full bike I’ll look into it.

    Thanks for the interest!

    jeron
    Member

    Hi, selling my Intense Slopestyle

    Selling due to needing funds..

    Its an awesome bike, incredibly light at 31lbs and rides brilliantly. Everything is working perfectly.

    Forks are serviced every few months and have new SKF seals – these things are incredibly plush, best forks I hace tried.

    Wheels are only a few rides old, so are also in great nick. 100% true also.

    As you can see from the spec below, its all as high spec as you can get.

    I try to be as honest as possible with my auctions so now you have heard plus points, here are the low points.

    As to be expected, there is the odd minor scratch here and there (as the frame is raw its in great condition), but nothing major at all, whatsoever!

    The section of frame where the dropout bolts in has an incredibly minor crack in it. Don’t be alarmed by this! You can see in the photo below where it is – right between the two dropout holes…
    This has been looked over by an engineer for a 2nd opinion.
    Due to where the bolts are, the brace which has cracked in the middle actually serves no functional purpose whatsoever, so the crack will not affect anything even remotely. As it is the dropout holding the swingarm together, not that brace.

    So nothing to worry about there, its hard to even notice – I just want the buyer to be pleased with the purchase.

    I hope thats everything, its based near Brighton so can be viewed if you like. As you can see this build cost many thousands to put together!

    Spec List.

    Medium Intense slopestyle frame
    Chris King Evolution (1.5 step down to 1 1/8) headset
    Fox DHX 5.0 rear shock with RCS Titanium Spring
    Fox VAN 36 RC2 (Purchased brand new) *******NEW 2011 SKF seals*********
    Shimano XTR cranks
    Shimano XTR BB (2011)
    Atomlab Aircorp pedals (or Tioga surefoot)
    Sunline V-One AM 65mm stem
    Easton Carbon Monkey Lite DH bars 711mm
    Lizard Skins grips
    Hope Tech M4 brakes w/ braided hoses F and R with Floatign rotors (205 F and 185 R) (2011)
    Shimano XT rear mech shifter
    Thomson Elite seatpost
    Selle Italia SLR saddle Ti rails – 135 grammes
    Gamut P30 chain Device
    Gamut 34T single ring (2011)
    Shimano XT 9 SP rear cassette (2011)
    Stans ZTR Flow rims on Hope Pro EVO II (2011)
    Specialized 2.2 Purgatory F and Specialized ‘The Captain’ 2.2 R (2011)

    Can also throw in the following:

    2011 Shimano Saint rear mech (cage has been removed so is in bits)
    SDG Ti Railed saddle
    Intense 2.35 909 DC tyre
    Specialized Clutch 2.3 Tyre

    Get in touch, open to offers too.

    Based near brighton










    Mc smiley
    Member

    Despite wishing I could sell my younger brothers for this. If you are to split, I would be interested in wheels, tyres, drivechain and a few bits and bobs.
    Have you got it over on southern downhill?

    jeron
    Member

    I’ll get it up on sdh if I get time today.

    Its a bargain for the full bike.. xtr cranks etc!

    hora
    Member

    Interested in the forks and bars if you’d split.

    How old are the forks/when were they last serviced and how long is the steerer? I need at least 200mm.

    jeron
    Member

    09 Forks I believe. Serviced every few months, incredibly supple.

    Will check if I do come to split. Its on ebay too..

    http://www.ebay.co.uk/itm/230683158810?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_8584wt_1274

    jeron
    Member

    Will take £1600.

    jeron
    Member

    buuuummppp

    aye-aye
    Member

    Hi
    Do you think the crack could be welded?
    Does it go all the way through?
    Cheers

    jeron
    Member

    Hi,

    Yes and yes, though the metal is not separated as its held together by the dropout.

Viewing 13 posts - 1 through 13 (of 13 total)

The topic ‘Intense Slopestyle, Fox 36 RC2, XTR, Pro 2 evo etc £1650, bargain!’ is closed to new replies.