- Hubs, unramped chainrings, Endura glasses, stems, n-gear jump stop.
Bigger photos are in here: http://www.flickr.com/photos/41784167@N02/sets/72157635271043925/
Reply on here or email, paypal or bank transfer is fine. My email address is in my profile and paypal address is the same one. I’m known to many on here and shifted quite a bit on here over the years so I won’t be ripping you off. I am in Plymouth and very near A38 if you want to pop in and have a look, and save a couple of quid on postage.
Brand new, tried on once Endura Shark glasses/ 3 lenses set. Like these. and indeed apart from a slightly different nose bit exactly like the rather excellent Bloc Shark glasses I already have, so this race prize isn’t needed. Cheapest online seems to be £28 delivered so £18 posted to you.
Specialized Stout 20mm front hub, 6-bolt disc, 36 holes. Bearings spin but feel a bit grumbly even after a flush and regrease. Bought s/h for a wheel I never ended up building. £12 posted.
Brand new, never built up Novatec GCC rear hub and skewer. 32 hole, 135mm qr, 6 bolt disc fitting. Shimano xt quality and a whole 25g lighter than a 6-bolt m765 hub. I bought it from the rather ace Spokesman Wheels for £38 posted and never built it up: yours for £25 posted.
Brand new, never built El Gallo “FR” 32 hole hub. 135mm qr, 6 bolt disc, cartridge bearings and rather loud (between superstar/novatec and hope in volume/walker disturbance) freehub. Again, abandoned wheel project and has only been out of the box for photos. £30 posted.
Planet X Ultralight CNC stem in 6 deg rise/drop, 31.8 by 120mm flavour. Like this one. Four or five rides old, you’d hardly tell it had been on a bike. Just a bit too long for me. This one weights 160g on my digital scales. £40 in that length from Planet x, so £20 posted from me.
No name stem 60mm, 10 deg rise for OS bars. Came on a commencal jump bike I had years ago and not really jumped on much. Pretty crap to look at but I suppose someone will have a use for it for a budget build or to try out a stem length cheaply. £7 posted.
N-gear jump stop, (like this) for 35mm diameter seat tube (this bit is important though I expect you could bodge it onto a smaller tube with a bit of old inner tube to space it out. Used for about three rides and in lovely condition. £5 posted. (most of that will be the postage!)
Blackspire 38 tooth unramped DH chainring, standard 4 bolt 104 bcd. Loads of life left, closeup of teeth shows very little wear. £8 posted.
FSA 40 tooth unramped chainring, standard 4-bolt 104 bcd.
Again very little use, see closeup: £6 posted.
Thanks for looking.Posted 4 years ago
The topic ‘Hubs, unramped chainrings, Endura glasses, stems, n-gear jump stop.’ is closed to new replies.