Hope Pro 2 10mm Bolts: Length Home › Forum › Bike Forum › Hope Pro 2 10mm Bolts: Length Viewing 7 posts - 1 through 7 (of 7 total) Hope Pro 2 10mm Bolts: Length MowgliMember Mine are about that – maybe 45 or 50. No shorter than 40. Button head stainless M10, but any head will work I suppose. Posted 6 months ago gofasterstripesSubscriber Hi, Can anyone give me the specifications of the original M10 bolts for a Pro 2 Bolt-up? 10*40mm? Posted 6 months ago Rubber_BuccaneerSubscriber The bolts in a pro2 Evo ss/trials hub I just bought are 40mm. Possibly the same? Posted 6 months ago NorthwindSubscriber Pretty sure I’ll have the actual Hope bolts somewhere, if you want to keep it original- I think I have a whole axle set that’s missing its endcaps and is therefore worth nothing 😛 Want em? Posted 6 months ago Rubber_BuccaneerSubscriber If Northwind can’t find his I can stick my 40mm bolts in the post if they are suitable. I won’t be using them as I’ve ordered a 142*12 axle Posted 6 months ago jam boSubscriber Also have a spare set, just put some verniers on them, 34mm threaded section, 39mm total length. Posted 6 months ago gofasterstripesSubscriber Thanks peeps! And thanks also for the offers. I can now confirm that 40 and 35mm will both work, as turns out that was what was in there! Settled on a pair of 50mm that damn near met in the middle 🙂 Posted 6 months ago Viewing 7 posts - 1 through 7 (of 7 total) You must be logged in to reply to this topic.