Hope Mono Trail disc brakeset with carbon levers & Hope anodised floating rotors

Home Forum Classifieds – For Sale Hope Mono Trail disc brakeset with carbon levers & Hope anodised floating rotors

Viewing 1 post (of 1 total)
  • Hope Mono Trail disc brakeset with carbon levers & Hope anodised floating rotors
  • Pic are here: http://imageshack.us/g/7/pict2974w.jpg/

    Save £108 on new and get carbon levers and anodised rotors.

    £180 collected from Cotgrave, nr Nottingham or £190 inc. Royal Mail Special Delivery.

    Text or call 07725072359

    Hope Mono Trail full brakeset including front and rear brakes with carbon levers, front and rear rotors and all bolts. Everything you need to go straight onto your bike.

    These retail for £154 for front and £154 for rear at Chain Reaction: http://www.chainreactioncycles.com/Models.aspx?ModelID=17388

    That’s £308 and you don’t get the carbon levers or the blue anodised floating discs that these have got.

    They look like new. If you look extremely closely, you may notice the lightest of light marks, but seriously, there is nothing that you will ever see from more than 30cm away and they will look and perform like a brand new set of brakes on your bike. Hopefully, you can see this in the photos, I have tried to show all sides of both levers and calipers. The only scratch that can be seen is on the blue part of the rear disc (last photo), but again, you will not see this on the bike.

    They are supplied with the 140mm rear and 160mm front disc shown in photos. This makes the whole brakeset extremely lightweight and there is still plenty of power and amazing modulation.

    Both brakes are set up for IS mounts at the moment. The rear will fit all bikes the way it is and the front will bolt straight onto IS mount forks. However, If you have Post Mount forks, you can buy an adapter for £11 to get these to fit your forks.
    http://www.ukbikestore.co.uk/product/219/hbsm20h/hope-brake-mount—is-caliper-to-post-mount—20mm.html
    This means you will need to use 180mm front disc though. In this case, I can swap the 160mm for a 180mm hope disc although it is not the same floating anodised disc as the 160mm.

    Fluid pressure is spot on – no need for a bleed. As I said, they perform as new.

    Both sets of pads have at least 90% of pad wear left and I think these are the original pads that came with the brakes.

    Front hose is 76cm and rear is 134cm. They were on a 17 inch full susser with 140mm forks.

Viewing 1 post (of 1 total)

The topic ‘Hope Mono Trail disc brakeset with carbon levers & Hope anodised floating rotors’ is closed to new replies.