Search the forum using the power of Google

Viewing 18 posts - 1 through 18 (of 18 total)
  • Homemade downtube mudguard?
  • hora
    Free Member

    Ideas using household ‘stuff and is it possible and works?

    TandemJeremy
    Free Member

    thermoplastic 4″ guttering from b&q – thats what I use – you can heat it up and mould it to shape

    neil853
    Free Member

    really? for the sake of a tenner? 🙄

    Blackhound
    Full Member

    If Hora is looking for ideas to reuse/recycle something then that is good, surely. If buying to make your own then I agree that a decent saving has to be made to be worth it.

    hora
    Free Member

    Yes. I’ve got a SKS? mudguard- utterly useless thing. I just don’t want to buy another product that spins or doesn’t catch all the spray etc and ends up being ditched!

    Del
    Full Member

    😆 on the turner i trust?
    just stick a pi55 flap on the fork. job done.

    hora
    Free Member

    Not a turner but I’ve also found the pissflap doesn’t work

    ruscle
    Free Member

    Make a DIY version of the muckynutz fender bender using a plastic milk bottle.

    wors
    Full Member

    I’ve just fitted a muck nutz bender fender, to replace a neoguard. The fender bender is far better.

    epicyclo
    Full Member

    Here’s one I made from guttering and a heat gun. It’s rough because it was temporary.

    It was for the back of the seatpost, but it’s the same principle.

    Here’s a homemade mudguard from the mtbr forum. Uses large plastic 55 gallon* drums for base material.

    * probably 44 gallon here – anyone know a good freebie source for these?

    hora
    Free Member

    Make a DIY version of the muckynutz fender bender using a plastic milk bottle.

    I’ve just googled that- looks a good design and not as fugly. Might pull apart a milk bottle later!

    z1ppy
    Free Member

    Which SKS mudguard? If it was the shockboard, then you screwed, as there nothing out there that actually works as well as they do.
    Brilliant mudguard, and when the fitting breaks, as any of these designs are want to do when you crash, just attach it on with a couple of zip ties.
    IME under downtube mudguards are useless, unless matched with a pissflap type guard too, then they only ‘just’ start to match the shockboard.
    Just my experience…

    althepal
    Full Member

    Did the milk carton one. Seems to work well and doesnt look too bad.
    Enjoyed bodging it togetherbut a muckynutz might be a bit less daffodil..

    wors
    Full Member

    I’m going to try and bodge a something like the bender fender for the rear.

    cookeaa
    Full Member

    Old plastic milk bottles, old knackered inner tubes, stanley knife and zipties…

    Hours or blue peter style fun…

    Enjoy!

    stayhigh
    Free Member

    Dont suppose anyone has a template for a MN type affair?

    z1ppy
    Free Member

    you need a template?

    stayhigh
    Free Member

    Why thank you 🙂

Viewing 18 posts - 1 through 18 (of 18 total)

The topic ‘Homemade downtube mudguard?’ is closed to new replies.

Search the forum using the power of Google

Join Singletrack From Only £12.501/2 Price Singletrack Offer

Use code HELLO54 when you join us as a print or digital member and your membership will be half price for the first year.

The Print+ membership where Singletrack magazine drops through your door, plus full digital access, is normally £45, now only £22.50 with the code. And a digital membership where you can read all the digital magazines is normally £25, and now £12.50 with the code.

Simply use code HELLO54 at checkout.

(New annually renewing membership only. Excludes Gift Memberships, Discount applies to first year. Cannot be used in conjunction with other offers, or when switching memberships)