Halo Tundra rims Tubeless or nay?

Home Forum Bike Forum Halo Tundra rims Tubeless or nay?

Viewing 8 posts - 1 through 8 (of 8 total)
  • Halo Tundra rims Tubeless or nay?
  • Premier Icon vondally
    Subscriber

    Hi have a halo 80 mm tundra rim can I use tubeless?

    If so is it straight forward?

    Premier Icon Northwind
    Subscriber

    Yes, but it’s not super easy- if you look in teh massive Calibre Dune thread, it’s the exact same rim just with different shaped cutaways. I got hte best results with a mix of electric tape and jiffy foam, and the easiest results with foam and a cut tube. But it was always a pain in the cock- totally worth it mind.

    Lawmanmx
    Member

    i did mine ghetto tubeless because it failed a few times trying the tape way, ghetto for the win 🙂

    shermer75
    Member

    What’s the foam for?

    Premier Icon Northwind
    Subscriber

    Builds up the rim bed a bit and takes away the gap- makes it way easier to inflate. It doesn’t do anything once the tyre’s up

    Premier Icon vondally
    Subscriber

    Thanks so what size inner tube would I use?

    Premier Icon Northwind
    Subscriber

    I used a schwalbe AV10- it’s just barely wide enough so you have to cut it carefully, but it’s cheaper and lighter than the AV10D that most people recommend.

    Premier Icon vondally
    Subscriber
Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.