Gxp pressfit and Enduro bearings Help please

Home Forum Bike Forum Gxp pressfit and Enduro bearings Help please

Viewing 2 posts - 1 through 2 (of 2 total)
  • Gxp pressfit and Enduro bearings Help please
  • Premier Icon blastit
    Subscriber

    So I need a little help.
    My Gxp pressfit has failed very quickly (surprise surprise), so instead of getting another one I thought I would put something better in.
    First go was Hope via the LBS but they mucked up and did not seem to know what they were doing. So I thought no thanks.
    So I ordered some Enduro ones from Betd but have come across a couple of issues while fitting tonight.
    First Enduro seem to be saying put the bearing in with the sticky out bit on the non-drive side should face inwards. The problem with this is it binds on the centre tube thing. (sorry for technical terms)
    Second is the seals don’t fit the drive side and are suspect on non-drive side.
    So help is needed please

    Premier Icon blastit
    Subscriber

    Well I have put it together with the non-drive side sticky out bit facing out and using the old seals. It all fits together nicely , will phone betd tomorrow and see what they say.

Viewing 2 posts - 1 through 2 (of 2 total)

The topic ‘Gxp pressfit and Enduro bearings Help please’ is closed to new replies.