FS: Shed clear out, some retro, some quality, some questionable

Home Forum Classifieds – For Sale FS: Shed clear out, some retro, some quality, some questionable

Viewing 15 posts - 1 through 15 (of 15 total)
  • FS: Shed clear out, some retro, some quality, some questionable
  • Premier Icon wonny j

    Shed clear out pics

    All prices inc postage 2nd class registered. Discounts for multi. May take up to 2 weeks to post as I’m on holiday next week.

    In order of the pictures:

    Mavic Cross Max SL wheels
    Probably 2007 edition. Rear freehub replaced but still some play. Comes with replacement spokes and superstar mavic spoke tool. (pic below)

    On-one singlespeed rear wheel with 16t cog and QR. Very good condition. Previously bought here but not used by me.

    On-one Mary Handlebars
    Brand new unused.

    Silverseat post comes with Specialized Stumpy frame(see below)

    Synchros retro stem. 1″ quill, 120mm, not o/s!
    good condition despite slight corrosion on the grease

    Kona Project 2 forks. V-brake and old style threaded steerer (145mm)
    Classic item

    LX v-brakes
    Bit of corrosion but work fine and springs are good.

    Deore v-brakes
    Good nick

    LX front mech
    31.8mm top pull

    Old skool silver hope XR for front wheel

    Avid Juicy 3 disk brake and caliper for front wheel.
    Hose length 85cm

    Tektro rear cable brake lever and cable

    Thomson Stem
    1.125″ steerer, 25.4mm, and 90mm at 5deg.
    Lovely item and a bit sad to see it go but I’ve gone OS

    Kona Stem
    1.125″ steerer, 31.6 and 105mm at 6deg
    Brand new, unused.

    Fibrax disk brake hose, 2.3m

    Hope Headdoctor components including stem topcap
    Brand new, unused

    Icetoolz chain whip
    Brand new, unused

    Hope rear QR
    Used condition

    On-one singlespeed 16t cog and spacers
    Bit worn

    Seatpost collar and clamp, 28.8mm
    Brand new, unused

    FSA roadie cranks from a Trek 1.6
    175mm, 50/39/30, pretty worn but some life left in the chainrings

    Shimano Sora Rear Mech
    Medium cage, works ok

    Shimano LX Front Mech (no 2)
    Bottom pull, 31.8mm, movement is a bit sticky but will loosen with WD40

    Pro Series Cyclo lockring remover
    Brand new

    Deore front shifter

    LX rear shifter
    Used, 9speed

    Deore Rear hub
    Good nick, bearings ok and freehub silky

    Shimano front QR

    Assorted goodridge brake components for Avid brakes

    Shimano middle ring, 32t, silver

    Shimano big ring, 44t,
    Bit worn but lots of life left

    Raceface big ring, 44t
    Pretty worn

    Shimano big ring, 44t,

    Middleburn middle ring, 32t
    Worn but lots of life left

    Kona Nuni Steel frame, 19” (top seat tube to bb), with cranks, chain and single speed tensioner
    Pretty battered but solid steel frame. I built up as a rough and ready communter for a while

    Shimano XT front mech, 34.9mm, bottom pull, 9sp
    Good condition

    Fox RP2 shock, eyelet to eyelet measures 165mm x 40mm slider
    Serviced and looked after. Good condition

    Specialized stumpjumper 19in frame with headset, seatpost and bottom bracket.
    All good condition despite age. Lovely steel frame

    Cannondale CAAD3 frame, bought 1998ish. 18inch.
    Quality solid frame with dent in seat tube. I rode this as a commuter for 4 years with the dent and it didn’t get any bigger or move at all, so I would be happy to use it for communting or gentle trail use.

    Fox F80 RL forks. 1.125”, 80mm travel, 180mm steerer. Disk or v-brake.
    Nice lightweight fork. Fairly regularly serviced and no play in bushing or damage to stanchions. Wiper seal service done on Sunday. Comes with cable guide. Some marks on paint

    Cannondale 27.2mm seat post

    Scott Pilot flat handlebars, 5deg sweep, 24”/620mm (i..e pretty bloody narrow)
    Retro ish item?

    Thomson Seat post, 31.6mm x 400mm
    Good nick apart from seatbag type scratch behind clamp

    Spokes and tool come with Mavic wheels (see above)

    Shimano Flat / clipless pedals
    Slightly dodgy release on one of the mechanisms, from memory it releases a bit easily.

    Hope seat clamp QR, 35.4mm
    Worn but functional

    Hope seat clamp QR, 31.8mm
    Brand new, unused


    hi ill take the wheels(crossmax) please, cheers martin 😀

    Premier Icon teethgrinder

    If you still have the RP2 after you get back, I’ll take it.


    The Rookie

    Interested in the ‘dale seatpost (27.2mm) if it’s relatively lightweight, could you get the weight please (kitchen scales will do).

    email addy in profile.

    Premier Icon wonny j

    Martin, yes – email to follow
    Robin, yes – email to follow
    The Rookie, yes it’s lightweight. I don’t have scales but it’s lightweight partly due to the single bolt mechanism. I’ll try to weigh it later.

    Premier Icon granny_ring

    Where abouts are you?


    here we go

    kona frame (any bearings with those h/s cups? and is the reason for selling with cranks that they won’t come off? – not too bothered either way but would be good to know)
    deore brakes (presume a pair?)
    Syncros stem
    on one s/s kit


    could i get photos of the Deore v-brakes please


    thanks Andrew

    Premier Icon wonny j

    Granny, I’m in Swansea.

    -I put the cranks and b/b on a few months back and didn’t use the bike, so assume they will come off fine.
    -I will include the rest of the headset including bearings, expansion wedge and seals.
    – Deore brakes are the black ones in the pic. A pair i.e. 2 calipers.
    -Happy to do £70
    – Can you email me on jjw1001@gmail.com please to confirm.

    Premier Icon wonny j

    Crossmax wheels
    Kona frame
    Deore Brakes
    LX brakes
    Tektro lever
    On-one singlespeed bits
    Synchros stem


    Hi, Interested in the Juicy brake. Could you tell me if it is Post or I.S. mount, is the lever for the right hand [moto style] and would you post to Spain at my cost?


    Premier Icon wonny j

    Hi Rusher,
    It is Post mount but with an IS adaptor. Please see pics. It is a right hand brake lever but you can run it upside down as well if required.
    Happy to post to Spain for £22. Will include a 160mm rotor as well for an extra £5.


    That’s great, wasn’t too clear in the pics. Yes please if you mean £22 including potage. I’ve only bought on here once about two years ago, so if PP is OK let me know what happens next.




    Sorry Wonnyj, waited a week so have just one one on the bay, good luck with the sale.

Viewing 15 posts - 1 through 15 (of 15 total)

The topic ‘FS: Shed clear out, some retro, some quality, some questionable’ is closed to new replies.