- FS: Fox Float 32 RL 150mm QR15 (VGC) and Fox Float 36 R (Spares and Repairs)
Up for grabs are the following:
Fox Float 32 RL 150mm Travel with QR15 Axel – VERY good condition. They are black with 1 1/8 steerer that is 195mm long and Post Mount break fittings. Bought new in August 2010 and stanchions replaced under warranty by Mojo in August 2011. Only used a couple of times since, and are now surplus to requirements (as I’ve gone for some coil 160mm forks). They work perfectly, with slight scuffing/tears of the stickers and a couple of small (<2mm dia) paint chips being the only signs they have been used at all – there are no marks on the stanchions. The little sticky pad behind the hose guide is also missing (the rest of the guide is there though). Yours for £375.
Fox Float 36 R Forks with 160mm Travel and 20mm bolt up axel (pinch bolts). They are brown in colour and have a 1 1/8 steerer that is 190mm long, IS break mount. They are well used, and the stanchions and bushings are worn, resulting in play and oil passing through the seals. They seem to hold air ok though, so as long as you top-up the oil from time to time, they are rideable. There are a fair few scratches on the forks, and the hose guide is missing. I’ll also include a TALAS 150mm spring that I have used in the fork – I can’t promise it’s all there though and it could probably do with a service. Yours for £50.
Not sure how to upload pics (first time posting on the forum), but can email them if you give me your address.
AdrianPosted 6 years ago
The topic ‘FS: Fox Float 32 RL 150mm QR15 (VGC) and Fox Float 36 R (Spares and Repairs)’ is closed to new replies.