F.S. Forks, Tyres, disc brake, helmet etc..

Home Forum Classifieds – For Sale F.S. Forks, Tyres, disc brake, helmet etc..

Viewing 14 posts - 1 through 14 (of 14 total)
  • F.S. Forks, Tyres, disc brake, helmet etc..
  • Mrtrotter

    A few bits for sale. Some like new.
    pics here:

    Manitou Splice Super coil forks. Adjustable 70-100mm. Lockout.- £45 posted.
    Taken off a new bike after 2 rides(so like new).
    Some decent features for an entry level fork.
    70-100mm travel adjust (like rockshox U-turn).
    Adjustable compression/lockout and rebound.
    Steerer 177mm (quite short so check if it will fit)
    Disc only- Post mount.
    Manual included
    Starnut installed

    Giro Hex helmet- Size small 51-55cm. 06 model. New/unused. not a mark on it – £20

    Shimano square taper bottom brackets. £10 for both
    1 x UN52 (Deore/LX)- 68×110- fairly smooth
    1x UN72 (XT)- very smooth

    Spare Thomson Elite stem expander wedge (for 1+1/8î steerer)- new- £5

    Avid Rollamagig- used but still ok- £3

    Front disc brake- Shimano Saint calliper (decent pads), XT lever (M755), braided hose (84cm), 160mm 6 bolt rotor & new bolts. Fits post mount forks (no adapter) – £35

    Schwalbe Big Betty 2.4î folding tyres- Used for a few months. Both in good condition. A bit of wear on one but not much. A bit of sealant residue inside. Great tyres but I have too many. £30 posted the pair.

    Rollmajic please. And a piccy or two of the Saint.

    BTW The link doesn’t seem to be working (Firefox)


    Pic of the brake saint please



    pics sent. Can’t seem to get on fotopic at the moment.


    Got any pics of the helmet? atlazz@gmail.com


    Pics here: http://r6045.fotopic.net/c1570085.html

    Rollamagig sold.
    Giro helmet sold (mate wanted one for his kid)

    Everything else still for sale.


    Very intrested in the saint front brake… Not got my bike here at the moment, got Marz 66’s on the front, do you think the hose should be long enough?


    From looking at a tape measure it doesn’t look like it will be long enough… Is it a goodridge hose, or will a goodridge hose fit the ends, if I need to fit a longer one?

    Cheers 🙂


    Are you around Mrtrotter?

    Does ther M755 lever work okay with the saint caliper? I know the M765 do as I’m running one with my rear saint (and they’re exactly the same as the saint ones!), but I understood that the M755 pushed less oil (I wanted to replace the bent lever on my M755 4 pot XT with an M765 lever, and was told it’d push the caliper too hard and may break the seals).

    Email me if you can 🙂


    can I have the rollamagig please :mrgreen:


    I would like the rollamagig too – except that I don’t know what one is and just like the name 😛


    Sorry. Just noticed these replies to my post. There doesn’t seem to be a little box to tick anymore so I can’t get replies e-mailed to me.

    Flogged all the stuff on e-bay last week. Not sure about the brake lever/caliper compatability thing. I got the brake off here a while back but never got round to using it. It seemed to work ok when I popped a rotor between the pads and squeezed the lever, although you have me worried now as I just sold it for £50 on e-bay!


    wow, thats not much less than new! Hopefully it’ll be okay 🙂

Viewing 14 posts - 1 through 14 (of 14 total)

The topic ‘F.S. Forks, Tyres, disc brake, helmet etc..’ is closed to new replies.