- FS: Charge Blender Ti frame, Pike 454s, XTR, Hope, X0, Atherton PRO, Thomson…
Few bits for sale, all located in Derby. Prices incl postage. Payment by Paypal Gift (unless you want to pay the fees in which case normal is fine), bank transfer or cash on collection.
*Cannondale XC3 Si integrated stem/steerer – This is for Lefty forks and is 90mm with a 5 degree -ve rise. This is the shortest stem you can get for leftys and is outrageously light…if you don’t run your Lefty with one of these you’re doing it wrong! There is a slight mark on the topcap and the the lower screw cap isn’t present but they are available off ebay for c.£5 – £25
*Sunline V-Two bars – These are obviously pretty scruffy but perfect for a hack build etc. Cut down to 685mm – £8
*Vavert Saddle – excellent condition – £8
*Hope Race X2 matchmaker clamps for Sram shifters – Mint condition – £14
*Shimano XTR M970 chainrings – Well used, won’t take a new chain but may be of use to somebody – £15
*Charge Blender Ti frame– This is a pretty special bike that’ll do pretty much whatever you want it too, it’s unbelievably versatile and seriously light. It’s in very very good condition as a result of very little use. It’s a one size fits all frame which equates to a c.16″ seat tube – £650
*Rockshox Pike 454 coil U-turn forks – These top of the range Pikes work fantastically, there are no marks to the stantions. The lowers are also in VGC although they have been touched up in the past – these are barely visable though, I tried to photgraph them and they just wouldn’t show up – £195
*Hope headset – A few minor cable rub marks but overall VGC – runs nice and smooth – £30
*Thomson Elite seatpost – 27.2 x 410mm, VGC other than some minor markings as pictured – £35
*Sunline V1 bars – low rise, cut to 710mm, VGC other than grip marks which obviously get covered up! – £17
*Atherton Pro DH stem – 65mm, very very good cond other than the small faceplate scuff – £37
*Charge Spoon saddle – very good other than a very small nick in the leather as pictured – £12
*Sram X0 right hand shifter – 9 speed, works perfectly, lever was once bent slightly but went back no problem, see photo – £40
*Shimano SLX chainset – 170mm arms, fitted with a 32t XTR ring. A few marks as pictured but overall v.nice cranks – £43 or £58 with a barely used XTR BB
*Hope seatpost clamp – 31.8mm, VGC – £10
*Hope gunmetal headset spacers – 1x10mm, 1x5mm – £3 the pair
Any interest get in touch (email in profile)!
Cheers,Posted 4 years ago
The topic ‘FS: Charge Blender Ti frame, Pike 454s, XTR, Hope, X0, Atherton PRO, Thomson…’ is closed to new replies.