front mech gear cable routing on Mega TR

Home Forum Bike Forum front mech gear cable routing on Mega TR

Viewing 10 posts - 1 through 10 (of 10 total)
  • front mech gear cable routing on Mega TR
  • Premier Icon shredder
    Subscriber

    It is a mech mount and the guides run on the underside of the top tube.
    Mine came with a choice of double guides for a front mech and dropper or single guides. Also on the back of the seat tube is a mount that accepts a C clip thing to hold the cable coming down to the mech.

    tops 5
    Member

    Yep should be a bag of guides in the box

    Premier Icon jimmy
    Subscriber

    Just got a mega tr frame and it looks like it has a bolt on mech mount (or maybe it’s just for a chain guide) but no cable guides on the frame. Is this right or can it be done?

    Premier Icon jimmy
    Subscriber

    Right, still struggling with this. I don’t see how the c clip thing on the back of the seat tube is of any use. It needs to be an actual cable stop to tension against… Right?

    gt900uk
    Member

    Cable stop is built into the direct mount front mech.

    rab5474
    Member

    The cable outer will run directly to the front mech

    rab5474
    Member

    Just make sure you have a 2×10 mech. 3×10 will foul the swingarm as the cage is longer

    samjgeorge86
    Member

    Don’t run a front mech. Problem solved 😆

    Premier Icon jimmy
    Subscriber

    Riiiight, so I do need direct mount. Sorted, ta.

Viewing 10 posts - 1 through 10 (of 10 total)

The topic ‘front mech gear cable routing on Mega TR’ is closed to new replies.