Fitting GXP BB

Home Forum Bike Forum Fitting GXP BB

Viewing 5 posts - 1 through 5 (of 5 total)
  • Fitting GXP BB
  • Premier Icon frogstomp
    Subscriber

    Assuming it’s not the press-fit version then, yes, the shells are done up with the same tool.

    boblo
    Member

    Yeah, it’ll be screwfit as it predates the plethora of pushfit standards.

    flibrose
    Member

    I am in the process of trying to change mine. Problem I have is the crankset axle has a collar attached on the non drive side which is stopping me removing the drive side bottom bracket from the crank. I have searched the web but am finding no answers. Did intend putting a picture up here today at some point to see if any of you guys could help. The hollow tech tool does work by the way.

    boblo
    Member

    I’ve never used GXP before. Is the installation tool the same as the Shimano Hollowtech one please?

    boblo
    Member

    OK ta. I have both the Superstar socket and a Park ring tool HTII types so I should be able to make progress with those 🙂

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘Fitting GXP BB’ is closed to new replies.