Hi all

Can’t seem to find a pair of presta valves to suit the Enve 650B tubeless rims.

Can anyone point me in the right direction please.

I hear Stan’s make a good valve but cant find any long enough to suit the 31mm depth of the rim.

Thanks

Matt

Also interested in this.
Are [/url]these not suitable for 650B ?
Have you contacted Enve ?

650b specific valves? Love it!

Stans do a 44 mm long tubeless valve it’s listed as the road bike version

Valves.

Oh yea.

http://www.evanscycles.com/products/enve/am-tubeless-kit-ec050850

Enve do a tubeless kit which includes the valves. Contact the distributor…
http://www.saddleback.co.uk/contact-us

Superstar valves are perfect

Cheers peeps

The Enve rims are 31mm deep due to the internal spoke nipples so the 44mm presta valves are to short.

Looks like ill have to go through Saddleback and try for some. Bearing in mind they have built the wheels for me and not supplied any rim tape or valves.

Nice Troll post wwaswas – 10/10 for effort.

Thanks again

rim tape and valves only come with complete wheel sets (USA Only?)

i used stans long valves with mine, and the ENVE tape is just Gorilla tape

Cheers Dirtyrider

Do you have a link to the stand long valves. Cant find them anywhere.

Hepsta – just type in 44mm tubeless presta valve into google. CRC, pedal on etc do the Stans.

mashiehood – Member
Superstar valves are perfect

No one who buys £1600 rims would put cheap superstar tat on their bike….

44mm Stan’s is what i used

you can also extend them if you want (you don’t have to)

fit extenders onto the valves you have ?

That is one expensive wheel set. I hope they bought you dinner first.

No one who buys £1600 rims would put cheap superstar tat on their bike….

Oops, taking them out of my Enves as I type 😀

http://www.wiggle.co.uk/vittoria-pair-of-42mm-valve-extensions/?lang=en&curr=GBP&dest=1&utm_source=pla&utm_medium=base&utm_campaign=uk&kpid=5360248326

http://www.chainreactioncycles.com/stans-no-tubes-universal-44mm-valve-stem-pair-road-2012/rp-prod38827

Wasn’t that hard, was it?

mtbmatt – as mentioned previous in the thread 44mm are too short.

Harder than you think eh?

I have some coming from Saddleback now anyway.

they are not too short as thats what ive used