Viewing 8 posts - 1 through 8 (of 8 total)
  • Dt Swiss hubs
  • Premier Icon canna
    Free Member

    Does any body know if you can get a 12 mm through axle for a Dt Swiss 240s hub ?

    Premier Icon BearBack
    Free Member

    12mm end caps probably.
    here

    Premier Icon canna
    Free Member

    They only fit the 350/370 hub I’m looking for some for a 240 hub

    Premier Icon packs
    Free Member

    I think you need these HWGXXX00S7564S

    According to Universal Cycles: “Compatible with 2015+ black 180 front hubs (QR or 15mm). Does not fit white 180 hubs. Also fits: XMC1200, Spline 1501, RR21 DiCut and RC Carbon wheels”

    The cap O.D. is 27mm, not 30mm like with HWGXXX00S7000S.

    Premier Icon canna
    Free Member

    Thanks I will have a look at that

    Premier Icon hatter
    Full Member

    For all DT spares, check here first:

    https://www.dtswiss.com/en/support/product-support

    Premier Icon nixie
    Full Member

    Front or rear. If front the version that takes up to 15mm or the 20mm version?

    Premier Icon Northwind
    Full Member

    If it’s a very old DT240, then the axle might need replacing- they pre-date the 12mm standard so some have a smaller hole. (and because they last forever, there’s still a few of these QR-only parts out there). Otherwise, as above, endcaps. You’ll need to sell a kidney but other’n that, ideal

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.