Colnago Steel retro bike sizing?

Home Forum Bike Forum Colnago Steel retro bike sizing?

Viewing 6 posts - 1 through 6 (of 6 total)
  • Colnago Steel retro bike sizing?
  • singlecrack

    We’ll I’m 5’10 and ride a 56. It seems about right for me ….I’ve 30″ inside leg……longer torso as well 😆


    I’m pretty much the same measurements and ride a 56 ctc. So it’s 58 centre of bottom bracket to the top of the top tube.

    I have tried both bigger and smaller and the above is what i have found comfiest. You may find that an older frame may have a fairly long top tube. Again that’s going to be dependant on torso arm length and other stuff. I would definatley see if you could try a few before you buy.

    i think that’s ruled out the 58 then…

    the 57 is an 80’s mexico…

    Anyone got an old Colnago?

    I think a 57 or 58 would suit, I can’t try either so need to plump for one.

    I’m a gnats chuff under 6 ft tall, 33 inside leg, longer torso than legs

    Anyone got a clue, google is fruitless…

    bump for today, any more experiences?


    I’m 5’10” 32 leg

    My late 80’s Colnago Super is 54 ST and TT … it’s perfect in every way.

    Easier to fit a small frame to a bigger chap than vice versa

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Colnago Steel retro bike sizing?’ is closed to new replies.