- Clear out – DHX 5 Coil, Thomson 70mm stem, Ti Spring, XTR shifter etc etc
Clearing out the spares box!
FOX DHX 5 Coil (215 x 63) which has not been used since being serviced by Loco a few months ago, was used on my Alpine for a year prior to it being serviced. Some scoring on the body from spring which is normal and does not impact performance and can be seen in the pictures but otherwise excellent condition and perfect working order:
£130 posted for shock minus spring
£200 posted for shock and 400lbs Ti spring (ill throw in 350lbs steel spring)
(i’d sell the Ti spring for £75 posted)
Thomson 70mm stem 0deg rise (standard steerer and for OS bars)
Excellent condition (the Mrs has decided shorter is better :0 ) after 2 mts use
XTR front shifter (LH)
XT front mech (think its classed as multi pull and includes the spacers to fit numerous seat tubes)
Came off a 6 mth old bike when moving to 1×10 (apologies for dirt!)
Truvativ AKA 90 mm stem
Excellent condition – Used for a couple of rides then split the bike and its sat in spares box since
Email j99tru ( at ) googlemail (dot) comPosted 5 years ago
Depends on the suspension design, there is a calculator on TFT website.
The alpine is obviously a single pivot with long Ish stroke so suited me perfectly when I was 12.5 st kitted up.
Edit – but should add that it’s also preference, I had the boost valve set to middle and could get full travel when really pushing it, so if the boost valve was turned down then a lighter rider would get full travel and with it turned up it would be suitable for a slightly heavier rider
ThanksPosted 5 years ago
The topic ‘Clear out – DHX 5 Coil, Thomson 70mm stem, Ti Spring, XTR shifter etc etc’ is closed to new replies.