Viewing 17 posts - 1 through 17 (of 17 total)
  • Nah actually this makes no sense, ignore
  • Premier Icon Northwind
    Full Member

    Basically just havering, ignore me

    Premier Icon psycorp
    Free Member

    I’ve done it.

    Spent about 3 quid on appropriately sized washers for the axles and disc. Worked fine but wasn’t really comfortable riding it like that long term.

    Premier Icon Northwind
    Full Member

    Yeah I just decided I’m not doing it for someone else when they’ll be away out of reach if it goes wrong, not cool. Cheers though!

    Premier Icon Bez
    Full Member

    Certainly makes no sense now.

    Premier Icon sweaman2
    Free Member

    I was impressed with your willingness to machine parts mind… sounded like quite the potential project.

    Premier Icon nedrapier
    Full Member

    I would. I’ve done it write a few times. It gets easier, then it gets harder again. Then easier, when you’ve figured out the parts that don’t matter so much and which bits are important. Good luck!

    Premier Icon Mary Hinge
    Free Member

    I think I get it. It’s the left handed one

    Premier Icon CaptainFlashheart
    Free Member

    Make sure you fit it the right way round…

    Premier Icon somafunk
    Full Member

    The trouble with any compartmentalised situational observational decree such as the one in question is the fear of leaving yourself open to criticism, which on an open forum can often lead to hasty exclamations of “Godwin’s” , thankfully this is not one of those situations so I figure you have gotten away with it, well done………have a lollipop

    🍭

    Premier Icon matt_outandabout
    Full Member

    I wouldn’t, the Italian version is inferior to the Spanish one.

    Premier Icon hopefiendboy
    Free Member

    On a promise? 🙂

    Premier Icon rOcKeTdOg
    Full Member

    lots of lube is key to success the first time

    Premier Icon perchypanther
    Free Member

    Have you also come home, got drunk and walked two lots of  500 miles?

    Premier Icon hols2
    Free Member

    Decisiveness is the key. Either do it or don’t do it. Once you’ve decided, stick with it.

    Premier Icon epicyclo
    Full Member

    The left hand threaded differential compression spigot nut is what you needed for your project, preferably sintered.

    No need to be shy about it.

    Premier Icon martinhutch
    Full Member

    Have you also come home, got drunk and walked two lots of  500 miles?

    No, he just comes from Romford.

    Premier Icon vicksplace
    Full Member

    Is this a new STW version of Jeopardy?

Viewing 17 posts - 1 through 17 (of 17 total)

The topic ‘Nah actually this makes no sense, ignore’ is closed to new replies.