- Bits Clearout – Tyres, bars, forks etc
Having a garage clearout as I’ve got my bikes to setups I’m happy with. All prices plus postage, and I’m open to offers.
On-one inbred stem, 80mm x about10 degrees. VGC, one chip on the back. £14
On-one Mary bars, black aluminium ones, uncut. Small scratches on one bend and from lockon grips. £20
Kona Primo DH OS bars and stem. Both black, bars are 680mm wide, 50mm rise. Stem is 60mm long. Both 1 ride old, swapped for something lower and shorter. £25
Truvatir XR XC riser bars, OS clamp. 640mm wide, 25mm rise. Quite a few surface scratches, nothing deep though. £7
Titec ringleader DH bars, 25.4 clamp, 690mm wide, 50mm rise. Black, with a few small scuffs/scratches but only superficial. £12
WTB Lazer-V saddle, black. 1 ride old – too wide for me, swapped it for a SDG. £12
Ritchey logic comp 6061 seatpost, silver, 31.6mm x 400mm. Very scratched/scuffed surface from a badly finished vario frame…. never actually ridden on as said frame was so badly finished it actually needed a different size post than vario claimed! £7
LX long cage rear mech, silver. Little use. £12
E13 SRS chain device, ISCG mounts with a bb adapter. Needs a new jockey wheel, as the one on it has no teeth left (still runs rine though). Clear bashring to suit up to 42t ring. Bashring has been bashed but still works fine. £30
Michelin Comp32 tyre, 2.8″. Ridden for 3 runs of Fort William, so a little worn but not much. £12
Michelin Comp24 tyre, 2.5″. Ridden for 1 day at wharncliffe, not much wear. £13
Michelin DH tubes x 3, heavyweight and tough. Schraeder (car) valves. £4 each or £10 for all 3.
Manitou SXe forks, 70mm travel, v-brake mounts and old style (close together than normal ones) postmount disk mount. Battered, and top out a bit, but still OK. £Postage plus a quid or 2
Rockshox Judy XL forks, twin crown, 100mm travel. Battered, IS disk mounts and v-brake mounts. Not getting full travel at the moment so probably only for spares. Think they’re from 1998. £Postage plus a quid or 2
Retro (1986, possibly 87) dura ace hubs. 32 hole, front one is pretty much spotless, rear is a bit less good and needs the bearings servicing, but still decent. Complete with 7 speed ultraglide 12-21 cassette and skewers. These are the ones with grease ports in the dustcaps. £30 (might split)Posted 9 years ago
The topic ‘Bits Clearout – Tyres, bars, forks etc’ is closed to new replies.