BIG DRIVETRAIN CLEAROUT, Chainstes, Mechs, Chaindevices, Pedals etc. + 50mm Stem
Right here goes, discovered I have a whole lot of “spares” so its time some got put to their intended use by others..!!
All prices INCLUDE postage.
Lots of images here… Images
1. XT M770 Chainset with Shimano bashguard and 32, 22t chainrings. No bb
Cranks in good condition but with some heel rub and scratches etc.
Chainrings in good condition, Shimano 32t & raceface 22t is brand new
There are a few gouges to the non-drive side cranks, but this is
2. Shimano M530 Trail Pedals – White, no cleats.
Some scuffs as you would expect but seen very little use
Bearings all smooth
3. Muckynutz Front Fender. Little use, good condition…
Not much else to say….
4. Pair of SRAM x9 Shifters – SPARES / REPAIR
3×9 LH shifter, 9spd RH shifter
The return springs have gone so up lever does spring back…
I think its a straight forward repair if you have the time / patience
Otherwise very good condition
5. E13 XCX Single ring top chain guide. BB mount.
Works fine, some scuffs as photos show…
I’ve noticed a slight hairline crack in the top moulding. This
doesn’t penetrate all the way through and doesnt affect function.
6. Sram x9 RH 9spd shifter. Very good condition
7. Sunline Stem 50mm. 31.8 bars. Probably one of the lowest stack
height stems out there…very very light
Good condition but some scratches to faceplate where I lent it up
against some granite, down which the bike promptly fell…
Does not affect strength or function
8. E13 Backplate with Taco. ISCG05. very good condition,
Few scrapes to the taco as you would expect.
Plus a few random E13 guide parts, not sure what so added for free…
Good way to upgrade if you’d benefit from a taco.
9. Front and Rear QR Skewers.
£8 for all 3
10. XT Front Mech 1… Good condition…tight
Top swing, bottom pull
34.9 with adapters to 29.8
11. Pair of Sram Cassettes. 1x PG950, 1x PG970
Both 11-32t in good condition, lots of life left
970 cassette is missing the spacers in between each ring hence
being sold together
[/url] IMAG3121 by Simonhill66, on Flickr[/img]
12. XT Front Mech 2.
Good condition – tight, top swing, bottom pull, 31.8 size
13. Basic Singlespeed setup.
Superstar tensioner (with fittings not pictured)
PC1 Singlespeed chain and 16t cog (Both unused)
14. Sram x9 9speed mechs – SPARES ONLY
Lots more pics of the above items here
Still with me….!! Any questions / interest bob me an email.
SiPosted 4 years ago
The topic ‘BIG DRIVETRAIN CLEAROUT, Chainstes, Mechs, Chaindevices, Pedals etc. + 50mm Stem’ is closed to new replies.