Viewing 7 posts - 1 through 7 (of 7 total)
  • Are all fork uppers the same length?
  • fd3chris
    Free Member

    As in could I replace a set of fox 32 29er uppers with a set of fox 32 26er ones ? I seem to recall reading somewhere that it’s only the lowers that are longer for a given wheelsize? Thanks.

    nixie
    Full Member

    Way too little info to answer that.

    tdog
    Free Member

    Huh!? at nixies post.

    I’m guessing 29er uppers would be longer for any amount of travel.

    molgrips
    Free Member

    My Rebas appear to be 26er forks with an extra little tube on the bottom to move the droupout further down.

    They are pretty old though.

    nixie
    Full Member

    Some might be, others won’t be. Will depend heavily on which exact forks the op is talking about. Hence not enough info.

    tdog
    Free Member

    Ok, fair enough 🙂

    weatheredwannabe
    Free Member

    Interested in this myself, as I’m thinking about using a Pike 26 or 27.5 steerer crown on my Pike 29er to change the offset. Ie Whyte bikes is running a 43mm offset on their Pike 29ers as are the new Transition 29ers.
    My 29er Pike is 140mm.

Viewing 7 posts - 1 through 7 (of 7 total)

The topic ‘Are all fork uppers the same length?’ is closed to new replies.