Advice please.. going from 1×9 to 1 x 10

Home Forum Bike Forum Advice please.. going from 1×9 to 1 x 10

Viewing 8 posts - 1 through 8 (of 8 total)
  • Advice please.. going from 1×9 to 1 x 10
  • tymbian
    Member

    So my LBS phoned me today saying the 32t Race Face wide narrow chainring I ordered on 18 August has finally arrived. So now i need a rear-mech, shifter, chain, cassette and possibly one of them there large sprockets the size of a dinnerplate. Is there anything else and/ or bargains out there?

    Has anyone done this anything I should know etc..

    acidchunks
    Member

    Slx shadow plus for 35 quid at Merlin 😀

    lee170
    Member

    Clutch mech is paramount

    glasgowdan
    Member

    An 11-36 cassette should be enough. You can get mech, shifters, chain and cassette from Merlin for 100 notes

    tymbian
    Member

    Do I need a long/ medium or short cage mech?

    superfli
    Member

    Medium or short will be fine. The ones cheap at Merlin are long cage.

    emac65
    Member

    I went the other way,didn’t notice any real difference,other than the price of everything ………….

    Premier Icon mattbee
    Subscriber

    I’ve not lost my chain yet with a Works thicky thinny & non clutch X9 rear mech. Mind you if I was buying new I’d get a clutch one just to be sure.

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Advice please.. going from 1×9 to 1 x 10’ is closed to new replies.