Viewing 5 posts - 1 through 5 (of 5 total)
  • 22 inner c/ring, 36 large sprocket, will my mech do it?
  • ton
    Full Member

    ordered some bits off crc.
    think I hit the wrong button when buying. ended up with a 12/36 cassette. which to be honest I don’t mind at all, mated with a 22 inner means any hill will be a nice easy spin.
    got a new long cage rear mech too…..will it cope?

    ThePinkster
    Full Member

    No problem as far as I’m aware. I use to run a 20/32/42 chainset with an 11-34 cassette without issue so I can’t see your setup being an issue.

    rayyoung
    Free Member

    Yes it will cope fine, it’s what I run on my 29er, just make sure your chain is the right length.

    Fresh Goods Friday 696: The Middling Edition

    Fresh Goods Friday 696: The Middlin...
    Latest Singletrack Videos
    zoo200
    Free Member

    yes no problem there mate just make sure your chain isn’t to long/short depending on your setup of rings

    zoo200
    Free Member

    my set up is XT long mech on the back 11-36t with 22/33/44 sram crank on the front…. and a triple mech of course 🙂

    chain length is key!

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘22 inner c/ring, 36 large sprocket, will my mech do it?’ is closed to new replies.