• This topic has 2 replies, 2 voices, and was last updated 1 year ago by Tim.
Viewing 3 posts - 1 through 3 (of 3 total)
  • 2002 Fox Forx Float 80 RLC Travel Spacers
  • Premier Icon Tim
    Free Member


    Long shot, but…

    I’m after two 20mm travel spacers for a 2002 float fork I’m using on a retro build (to drop the travel to 60mm).

    Anyone have any, know of any where that sells them or knows of a suitable alternative?



    Premier Icon bentudder
    Full Member

    I’ve just done this for some forks a friend kindly donated for one of the Udderlet’s 24″ wheeled bikes. I dropped the travel to 63mm on a pair of Float 100s using only a single Rock Shox Reba spacer. If you have the same sort of air shaft as the ones I adjusted, you should be able to reduce the travel without using spacers.
    Here’s how:

    Pinkbike Adjust Fox Floats using the push pin rather than the spacers

    Premier Icon Tim
    Free Member

    That’s great, thanks! I did notice that extra pin hole but wasn’t sure if that could be used or not.

    Need to measure but from memory it is ~20mm difference on my fork between the pin holes. But if you can use a Reba spacer then these are more available…

    I was tempted by a bit of conduit though 🙂

    Cheers for the help

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.