Wanted – drive train
£50.00
Kite flying, but need drive train for hard tail. Not looking to break bank. To fit Shimano freewheel.
1. Either 1 x 10 – shifter, cassette, chain, derailleur…maybe crank.
2 or 3×9 crankset, maybe chain and derailleur
thanks
Comments (5)
Leave a Reply
You must be logged in to post a comment.
djflexure 11th February 2019 at 11:34 am
can do 1×10 (SLX cranks, 36T cassette, zee shifter and derailleur)
or 3×9 SLX cranks, derailleur (no chain), have shifters too and a cassette
countrybumpking 13th February 2019 at 10:28 pm
Sami, did you get what you needed yet? I have a box of parts including 10sp clutch rear mech, front mechs (both 2 and 3 speed), front and rear shifters to match, cranks with double chainring (cranks good, rings very worn) and 2 sets of 9speed shifters. All shimano xt.
Let me know if interested and i’ll Root out detailed specs for you. Not decided on price but it’ll be low.
Cheers rich
countrybumpking 13th February 2019 at 10:30 pm
Sorry both front mechs are 2 speed but different types (top and bottom swing I think)
trap6 14th February 2019 at 3:43 am
All 10 spd,Xtr shifter,slx cassette,zee clutch mech and chain many miles left on the drive-train,slightly bent shifter bracket although has no affect on the shifting in anyway and is only noticeable when taken off bars.
Will try and supply shifter cable if found in bottomless spares box.
Mssge me through here if of any interest.
Cheers
trap6 14th February 2019 at 3:49 am
Oh sorry forgot too add the SLX Crank again not a lot of miles done as been in storage,not so sure what chain-rings I have but will look at let you know.