Specialized Stumpjumper FSR Elite 650b
£1,100.00
Bought my bike late 2016 from new and due to family commitments have not used it as much as I would have liked. There are a few scuffs but mechanically sound.
Bottom Bracket | SRAM, PF30, OS press-in bearings, sealed cartridge |
Brakes | Shimano SLX, hydraulic disc, metallic pads, I-spec compatible |
Cassette | SRAM XG-1180, 11-speed, 10-42t |
Chain | KMC X11L, 11-speed, w/ reusable MissingLink |
Cranks | SRAM X1, alloy, PF30 spindle, 30T, 94mm BCD spider |
Fork | RockShox Pike RC 650b, Solo Air spring |
Fork Offset | 4.2 |
Frame Material | M5 alloy, Trail 650b Geometry |
Front Hub | Roval Traverse, 15/20mm thru-axle, 24h |
Front Tyre | Specialized Butcher Control, 60TPI, 2Bliss Ready, folding bead, 650bx2.3″ |
Grips/Tape | Specialized Sip Grip, light lock-on, half-waffle |
Handlebar | Specialized, 7050 alloy, 25mm rise, 750mm |
Head Angle | 67 |
Headset Type | Hella Flush |
Pedals | Nylon, CEN std., w/ toe clips |
Rear Derailleur | SRAM X1, 11-speed, alloy cage |
Rear Hub | Roval Traverse 142+, SRAM XX1 driver body, 12mm thru-axle, 28h |
Rear Shock | Custom FOX FLOAT Factory CTD, AUTOSAG |
Rear Tyre | Specialized Purgatory Control, 60TPI, 2Bliss Ready, folding bead, 650bx2.3″ |
Rims | Roval Traverse 650b, alloy, disc, 29mm inner width, 24/28h |
Saddle | Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm |
Seat Angle | 74 |
Shifters | SRAM X1, 11-speed, trigger |
Stem | Specialized XC, 3D forged alloy |
Trail | 10.4 |
Weight (kg) | 12.97 |
Brake Levers | Shimano SLX, I-spec compatible |
Spoke Type | DT Swiss Revolution |
Bottom Bracket Height (in) | 13.19 |
Chainstays (in) | 16.54 |
Seat Tube (in) | 18.43 |
Standover Height (in) | 29.8 |
Top Tube (in) | 24.33 |
Wheelbase (in) | 45.59 |