A set of Shimano MT200 hydraulic disc brakes. The bleed screw port on the RH lever stripped a small amount of thread so I have replaced the screw with a slightly longer non-original one. can be seen in one of the photos.
length of the front hose is approximately 900mm, rear hose is approximately 1550mm. Came of a medium size trek roscoe.
comes with a 180 mm front rotor and 160mm rear rotor. Both Shimano original and supplied with rotor bolts.
also come with 2 sets of Shimano brake pads. Current pads are approximately 50% worn.
calipers are supplied with 4 bolts and 2 secondary locking devices.