This Ad expired and is no longer available.
See our other active classified ads.
by stuker
Published: 31st May 2021 (5 months ago)
Size? (Frame, clothing, wheel size etc. You can pick 3)
Will post in UK

selling my Santa Cruz Hightower (v1) frame.  The reason for the sale is that i have recently changed to the v2 frame.

The frame is a Medium in the top-spec Carbon CC.  I have owned the frame since new and got it from Pedal and Spoke in 2016 (proof available on purchase).  It been invisi-framed since new.  All of the invisiframe is still on it except the piece on the top tube has been removed as it got a bit tatty.

The linkage bearings have been replaced in January of 2021 (receipts available)

It comes fitted with the original RockShox Monarch shock which has hardly been used as i swapped it with another shock as soon as i built up the frame.

bad points:  there is a scratch from chain suck on the drive side chainstay which i have tried to show in the photos. It  cant been seen when the drive train is on.  There is a scuff on the down tube junction with BB shell from where the water bottom rubbed up against it.  There is a chip on the paint on the inside of the non-drive side chainstay.  I have left all the invisiframe on as its mostly in good condition but there are a few marks on it in places but obviously, these will disappear if you take off the invisiframe or replace it.

This is a great frame that i have really enjoyed riding in all conditions.  I do mostly light trail/ XC and a few bike park days now and again but nothing crazy.  This frame can be built up to either run 29 or 650B+ wheels.  i have run it in both configurations and like both for different situations.  It also has a flip-chip to adjust BB height and HT angle

More pics are available on request.  Looking for about £1000 but open to sensible offers and as i say can do a deal with the other shock i have on for sale here too if that is of interest

will post to UK mainland and Paypal pls.  collection possible too from RH20


To contact this user, please register / login

Leave Reply