g60dub
by g60dub
Published: 9th October 2021 (2 months ago)
£200.00
Size? (Frame, clothing, wheel size etc. You can pick 3)
26"
Post?
Will post in UK

Rochshox Reba
Model A3
26″
120mm travel
Serial number: 13T30012483
1-1/8″ straight steerer
Steerer length is technically 195mm but I’d say 190mm given the partial spiral cut.

Bought these as part of a frame deal so I gave them a full strip, check over and rebuild.

Mechanical condition is perfect – lower leg bushes are perfect, no slop, no scratches on any internal sealing surfaces and all o-rings, foam rings and seals are also perfect condition. Stanchions are perfect condition. As said the’ve had a full strip, clean and re-assembled/refilled using Slickhoney & Maxima 5W fork oil in damper & 15W in lowers.

I’ve also replaced the compression/lockout lever with a new item.

Cosmetic condtion is fair to good; there’s a small scratch on the rear left of the crown where someone has been utterly hamfisted when removing a crown race and there is some marking to the decal halfway up the inside lower left leg.

Lower legs are a wee bit matted but would come up really well if machine polished.

Note I don’t have a spare brake hose retainer so the forks will not come with one but I have checked that the threads are good.

Local pickup or can courier for £15 UK mainland

Notes on upgrading; these are standard RL models with the port orifice rebound damper but they can be heavily modded/upgraded with with either the SIDB RCT3 Motion Control DNA damper (11.4015.544.070 or 11.4015.544.270 – use the former if you are keeping the stock rebound damper or use the latter if you are also upgrading the rebound damper to the Rapid Recovery Rebound damper) which can then be further tuned by reshimming if you so desire.

 

To contact this user, please register / login


Leave Reply