George Easten
by georgeeasten
Published: 26th March 2021 (3 months ago)
Collection only

I’m having a clear out and thought I’d offer up some bits here.  I’ve been building bikes for over 20 years now and have far too many spare parts (the current collection might be borderline obsessive hoarder!).  List and brief details as follows but some other parts available so let me know if you’re looking for something specific or obscure and I’ll have a dig around.  All working and in good to excellent condition unless otherwise stated


Part Price
Cotic Roadrat.  Duck egg blue medium frame.  Ultegra drivetrain.  BB7 disc brakes.  Hope floating rotors.  Hope headset.  Salsa Cow Chipper bars. Mavic Open Pro.  Hope hubs (bearings are good but also have a set of new upgraded bearings that I can fit for you).  Hope QR skewers. New Vittoria Zaffiro Pro Control 30c tyres. £750
Surly Troll.  Black large frame. Rohloff rear hub, dynamo front hub. Chris King headset. WTB extra wide scraper rims. Hope Tech 3 brakes. Cinq 5 thumb shifters. Cinq 5 usb charger (powered by dynamo hub). Thomson masterpiece seatpost. Jones H Bar. Speedplay Drillium flat pedals.  Thorn expedition rear pannier rack.  Alpkit custom frame bag. Surly Extra-terrestrial tyres fitted and WTB Ranger spares. Cost approx. £4.5k to build. £1,750
Carver O’Beast full carbon fatbike forks.  1 1/8 inch straight carbon steerer (includes expanding plug). This is the QR version with 135mm drop out (yes, 135 up front!).  Reported to weigh just 570g which is ridiculously light for fat bike forks.  Some minor bubbling to the lacquer on one side.  one of the inserts for the disc mount is missing.  It’s a standard nut and should be available from ebay etc for a couple of quid. £100
Mavic Aksium disc wheels Rear is 12 x 142.  Front is 12 x 100.  Adapters are available to convert axle size (e.g. to QR).  Both are centre lock disc.  Front is mint rear has knocks from storage.  Ridden less than 30 miles then replaced with Hunt wheels £100
Hope Mono Mini Race (retro limited edition version with carbon levers and ti bolts).  Probably have some pads somewhere which I’ll throw in.  They were serviced by Hope then used for less than a year but have been sat for a couple of years so would probably benefit from bleeding £60
Sora crankset (no chainring) £40
Surly stainless steel chainring 110BCD, 44t (currently on sora crank) £40
Sora rear derailleur £10
XT rear derailleur (shadow clutch version. very few miles but needs lower jockey wheel as I removed it to repair another derailleur) £35
XT M8000 cassette. 11 speed. 11-42 £50
Deore 11sp shifter (compatible with XT derailleur) £15
Ultegra front derailleurs (various – bolt on and band on) £10 each
Ultegra flat mount callipers (need service) £5
Midllebrun crankset and chainring (38t chainring, 24 mm axle, for fatbike 100mm BB shell) £100
DMR V12 mg (boxed – basically new – ridden twice) £30
Ultegra rear derailleur (needs bottom jockey wheel as I removed it to repair another derailleur) £10
Look Keo Classic pedals £10
Easton EA70 stem 130mm +/-6degrees 25.4 clamp (boxed unused). A new old stock gem in a weird size! £20
Paul Components Tall and Handsome seat post (27.2mm).  This is the limited edition gold anodized version.  Fitted then removed.  Never ridden and boxed. £125
Lots of small parts including BBs, headsets, bar tape, chains, grips, seatpost clamps POA

To contact this user, please register / login

Comments (11)

Leave Reply