Back to Ads
This Ad expired and is no longer available.
See our other active classified ads.
danp63
by danp63
Published: 11th April 2022 (8 months ago)
£1,300.00
Size? (Frame, clothing, wheel size etc. You can pick 3)
Large
Post?
Will post in UK
Page Views
108

Size large Kona Process 111. 2016 model year but purchased new in December 2018. The original downcountry bike, has been well maintained and rides very well. Shock and forks have been recently (approximately 5 rides since service) serviced (air can and lowers only) and fork seals replaced with SKF low friction seals. New gear cable and brake pads and brakes have just been bled. A few scratches and rub marks on the paint but generally in very good condition. Few upgrades including the rear wheel, dropper, and drivetrain. Spec as follows:
Fork: Rockshox Pike RC 120mm
Shock: Rockshox Monarch RL 111mm
Front wheel: Novatech hub on WTB ST i29 rim
Rear wheel: Hope Fortus 30 with HG freehub. I’ll chuck in the original wheel too which is in OK condition but the hub has a bit of play despite new bearings.
Tires: Maxxis Minnion DHF exo dual compound and DHRII exo 3c Max Terra both set up tubeless
Brakes: Shimano SLX 2 pot on 180mm rotors. Shimano centrelock front and Magura rear. Sintered pads.
Cranks: SRAM X1
Shifter: SRAM X1
Derailleur: SRAM X1
Cassette: Sunrace 11-46 HG. I’ll include the original SRAM X1 10-42 if wanted.
Chain: KMC 11spd
Chainring: Blackspire Snaggletooth 28t. Will include original SRAM Xsync 32t if wanted
Seatpost: Rockshox Reverb 150mm with 1x under bar remote. Can swap for original KS Lev Integra 150mm if preferred but it has some bushing play and could do with a service.
Saddle: WTB Volt
Bar and stem: Kona XC/BC 35mm, 780mm × 35mm

To contact this user, please register / login


Leave Reply