Got one on the way and it was a bit of a spur of the moment thing, going to need a few bits for the build so can anyone help with sizes and type of…

Headset
Bottom bracket
Seat post (30.9?)
Seat post collar (34.9?)

http://www.silverfish-uk.com/DocumentHandler/9402

I did the same, very pleased with it so far

Headset = 1 1/8 – mine needed a bit of work to stop the steerer binding.
Bottom bracket = Press fit 41 mm (89.5/92 ?)- I got this to fit RF 24 mm spindle cranks
Seat post (30.9?) = Yes
Seat post collar (34.9?)= Comes with a Salsa (35.0) but a 34.9 fits

Thanks, downloaded the user manual but it didn’t have the sizes.

Press fit BB is ideal i have one sat here, What headset do you use its tapered on the 2013 asr isn’t it.

I really should have have looked into this first shouldn’t i.

Any opinion on forks, it will be Fox but 100 or 120 does the terralogic fork work very well i have never used a set with that on them.

The ASR 5 I believe is tapered, my ASR C is a straight 1 1/8 head tube and I use a hope headset.

Presently running a RS Revelation with 150 mm and lockout, not my first choice (preferred a Fox Talas) but forks with 1 1/8 steerer’s are getting thin on the ground.

What year? 2010 ASR5c has a strange tapered combination headset, BS threaded BB and 30.9 seatpost (can’t remember the ext. diameter or BB width)

2013.

Jes your right its is 1 1/8 straight.

That was stated with conviction, does that indicate the frame has been delivered ? 🙂

Not yet, shame they didn’t use the tapered head tube.