Hi, chaps.
I need a 160mm rotor to fit this:
I guess it is an older style?
NB I am unfamiliar with these; Will the offset be the same as a "Standard" 6 bolt type hub? (sorry)
Classifieds - For Sale
[closed]
WTD: Rotor to fit (splined) hope hub ; (pic)
-
Posted 2 years ago #
-
You need a splined adaptor to take a hope 5-bolt rotor. CRC used to sell the adaptor but i cant see it now, they still sell the rotors tho. You might get lucky on a second hand one tho. The offset will be similar enough to not be a problem mounting your caliper.
And no, there is no way to mount a 6-bolt rotor on there, or a shimano splined one either (before any suggests it).
Good luck! they were nice hubs in their time (still are even!)
Rich.Posted 2 years ago # -
Cheers for the info.
If it all gets too silly buying and finding bits , Ill probably settle for a complete wheel off here of the bay...
Posted 2 years ago # -
I used to have some of these hubs. As stato says you need a hope splined adaptor which from memory is shaped like a star and takes a 5 bolt disc rotor (again I think only hope made these). You'll also need a hope tool ( or something with 4 prongs that fit) to remove and retighten the lockring on the hub. Maybe someone on here has the bits kicking about. Good luck!
Posted 2 years ago # -
I used to have some of these hubs. As stato says you need a hope splined adaptor which from memory is shaped like a star and takes a 5 bolt disc rotor (again I think only hope made these). You'll also need a hope tool ( or something with 4 prongs that fit) to remove and retighten the lockring on the hub. Maybe someone on here has the bits kicking about. Good luck!
Posted 2 years ago #
Topic Closed
This topic has been closed to new replies.
