• This topic has 7 replies, 6 voices, and was last updated 12 years ago by sok.
Viewing 8 posts - 1 through 8 (of 8 total)
  • Wheel builder – Nottingham area
  • sok
    Full Member

    Does anyone know of a good quality / good value in or around Nottingham? I don’t want to spend a fortune at a LBS where the expertise may be questionable.
    Thanks

    takisawa2
    Full Member

    Have a go yourself…just done my second, & its come out spot on. Great sense of acheivment. The Roger Musson pdf download is excellent. Takes you through all the steps. Did my first on a jig but used forks in a workstand this time. 🙂

    mbydmt
    Free Member

    I’m in Nottingham too and was doubtful of some of the LBShops so have recently built the wheelset I wanted myself. Dead easy. Have a go. If you want some advice give me a shout.

    Lifer
    Free Member

    +1 for DIY, I used the wheelpro book which has everything (guides for making jigs and dishing guages for example)

    sok
    Full Member

    Thanks for the advice, you’re all a bit braver than me. Mind you, how wrong can this go…?

    crofts2007
    Free Member

    If not, try Dale at Sherwood Pines. Excellent wheel builder and mechanic.

    CharlieMungus
    Free Member

    Langdale Lightweights at the top of Westdale Lane

    sok
    Full Member

    Thanks Crofts and Charlie

Viewing 8 posts - 1 through 8 (of 8 total)

The topic ‘Wheel builder – Nottingham area’ is closed to new replies.