Forgot my gorillapod and didn’t have any gaffer tape on me, but did find a couple of zipties in the bottom of my camelbak.

What was your small and simple but satisfying bodge?

slainte 😀 rob

I tampered with the air pressure in my forks but didnt have an o ring to monitor the travel so cut a hair band and tied it round the forks.

I fixed a hole in the webbing section of my pack with a zip-tie

APF

OP, is that a retrogrouch landline?

It wasn’t today, but a few weeks ago. I needed a cassette spacer to put a 9spd cassette on a 10spd hub. Didn’t have one, but a bottom bracket spacer fitted perfectly, and the chain shifts flawlessly!!

Didn’t have the right spacers for my front mech to fit a smaller seat tube so i used old tube and some of hose lizard skin frame pads to space it out.. seems ok so far 🙂

dantsw13 – Member
It wasn’t today, but a few weeks ago. I needed a cassette spacer to put a 9spd cassette on a 10spd hub. Didn’t have one, but a bottom bracket spacer fitted perfectly, and the chain shifts flawlessly!!

Are you sure? I thought a 9 speed cassette was the same overall width as a 10 speed.